- Powerful formula cuts through layers of old finish in minutes
- Low odor - no harsh ammonia or solvent odors
- Rinse-free - no alkaline residue
- Fast-acting to save labor - requires little, if any, scrubbing
- Suitable for all types of resilient tile and hard surfaces - not recommended for linoleum or sheet vinyl floors
<
>
Betco Unlock No-Rinse Floor Stripper
640 fl oz (20 quart) - Fast Acting, Low Foaming - Clear - 1 Each
Product Code: BET888B500
Product Unit: Each
Non-Returnable Product
Product Details
General Information
| Manufacturer | Betco Corporation |
| Manufacturer Part Number | 888B500 |
| Manufacturer Website Address | http://www.betco.com |
| Brand Name | Betco |
| Product Line | Unlock |
| Product Name | Unlock No-Rinse Floor Stripper |
| Marketing Information | Unlock Floor Stripper cuts through layers of old finish in minutes. High-power, high-speed floor stripper was developed to penetrate and remove multiple coats of burnished floor finish with a minimum of labor. Suitable for use on most surfaces, this fast-acting, labor-saving product requires little, if any, scrubbing and greatly reduces the time it takes to strip a floor. Powerful, professional stripper requires no neutralizing or flood-rinsing after use. Low-foaming formula works with cold water, saving energy. Little to no odor is released during use so it is pleasant to use. Each gallon covers 400 square feet. Dilution varies from 1:12 to 1:5 according to application. |
| Packaged Quantity | 1 Each |
| Product Type | Floor Stripper |
Product Information
| Cleaner Volume | 640 fl oz (20 quart) |
| Recommended Use | Finish Remover |
| Directions/Instructions |
Recommended for removing multiple coats of water-based acrylic floor finishes from all types of resilient tile and hard surfaces. Not recommended on linoleum or sheet vinyl floors. Pre-test in a small area; color bleeding or discoloration may occur on linoleum, rubber tile, or asphalt tile. Sweep or dust mop floor to remove any large debris. For light to medium stripping, dilute 10 oz. /gal. (1:12). For heavy stripping, dilute 25 oz. /gal. (1:5) with cool water. Apply solution liberally to floor surface. Allow 3 - 5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low speed rotary machine, automatic scrubber or stripping machine. Pick up solution with a wet vacuum, automatic scrubber or mop and bucket and thoroughly rinse the floor. Allow floor to dry completely before applying finish or sealer. No flood rinsing is necessary if surface appears free of dust and residue. |
| Application/Usage | Floor |
| Features |
|
Physical Characteristics
| Color Family | Clear |
| Product Color | Clear |
Miscellaneous
| Recycled | No |
| Assembly Required | No |
| Country of Origin | United States |
Description
640 fl oz (20 quart) - Fast Acting, Low Foaming - Clear - 1 Each
