< >

    Betco Crete Rx LiquiShield Concrete Guard

    Ready-To-Use - 128 fl oz (4 quart) - 7.0 to 9.0 pH - Water Based, Low Odor - Opaque White - 4 / Carton

    Product Code: BET16790400
    Product Unit: CT4

    • Water-based guard that is low odor and easy to apply
    • Improves gloss and adds protection against stain and etch
    • Resists black marks, scuffs and soil
    • Will not peel, discolor or flake
    • Requires 2 coats to cover 3,000 to 4,000 square feet per gallon on terrazzo, concrete and other porous stone surfaces

Product Details

General Information

Manufacturer Betco Corporation
Manufacturer Part Number 16790400
Manufacturer Website Address http://www.betco.com
Brand Name Betco
Product Line Crete Rx
Product Name Crete Rx LiquiShield Concrete Guard
Marketing Information LiquiShield Concrete Guard is a water-based guard formulated to improve gloss while adding substantial protection against stain and etch. Low-odor guard is easy to apply and requires only two coats to cover 3,000 to 4,000 square feet per gallon. LiquiShield eliminates the need for floor finish and conventional coatings by resisting scuffs, black marks and soil. It will not peel, flake or discolor. Breathable formula is ideal for concrete, terrazzo and other porous stone surfaces.
Packaged Quantity 4 / Carton
Product Type Floor Polish

Product Information

Cleaner Type Ready-To-Use
Cleaner Form Liquid
Cleaner Volume 128 fl oz (4 quart)
pH 7.0 - 9.0
Recommended Use
  • Scuff Mark Remover
  • Black Mark Remover
  • Soil Remover
  • Stain Remover
Directions/Instructions

Recommended for polished concrete and terrazzo surfaces for extended stain and etch protection. Clean entire area with Betco DensiClean, allow floor to dry prior to application. Apply Betco LiquiShield at proper application rate, 3,000 to 4,000 sq. ft. per gal, with a low-pressure sprayer spread with a microfiber applicator pad or mop and bucket application. Allow to dry to touch, 45 to 60 minutes, then apply second coat using the same procedures. Allow second coat to dry 60 minnutes then high speed burnish with Betco Si Burnish Pad. Allow 1 to 2 hours cure time before floor is exposed to full traffic. Allow 24 hours before the use of cleaners on the floor. Maintain floor with Betco Crete Rx DensiClean and Betco Crete Rx Cleaning Pads for maximum protection and shine.

Application/Usage Multi Surface
Features
  • Water Based
  • Low Odor

Physical Characteristics

Color Family White
Product Color Opaque White

Miscellaneous

Recycled No
Assembly Required No
Country of Origin United States

Description

Ready-To-Use - 128 fl oz (4 quart) - 7.0 to 9.0 pH - Water Based, Low Odor - Opaque White - 4 / Carton

Alternative Products

We are sorry but no alternatives are currently available.

Additional Documentation

Reviews